- The GT-FSM01 is specifically designed for measuring the plasticity (P0) of raw and unvulcanized rubber. It is also suitable for determining the plasticity retention index (PRI).
- Integrated with an HMI touchscreen and a high-precision measuring system, this tester ensures accurate and reliable test results.
-
Standards
- ISO 2007
- BS ISO 2007
- ASTM D3194
- JIS K6300-3
- GB/T 3510
Principle
A cylindrical specimen is placed between the upper and lower platens and compressed to a thickness of 1mm, then held for 15 seconds. After that, a compressive force of 100N±1N is automatically applied for 15 seconds. The final thickness of the specimen is measured at the end of the force application, and the plasticity of the specimen is determined (the final thickness expressed in units equivalent to 0.01mm).
Ergonomic design:
The ergonomic design ensures convenient loading and removal of the specimens for operators.
Intuitive touchscreen:
Featuring a touchscreen interface, the system allows users to easily perform test setup, data recording, and results checking, ensuring intuitive and efficient operation.
Quick test procedure:
The quick test procedure allows users to preset test conditions and run tests in just a few simple steps.
High-precision measurement:
Featuring a high-precision digital indicator for accurate displacement measurement and a stable lever for test load application, the instrument provides reliable measurements and consistent results.
-
Intuitive interface
Features a highly intuitive touchscreen interface for easy setup and operation, ensuring efficient workflow.
Comprehensive rubber testing
Besides measuring the plasticity of rubber, the instrument can be used with an aging oven to determine the Plasticity Retention Index (PRI), evaluating oxidation resistance of raw rubber.
Efficient test procedure
The quick test procedure allows tests to be completed in a few simple steps, significantly improving efficiency and reducing test time.
Stable performance
Equipped with a stable mechanical force loading structure and temperature control system, the instrument ensures consistent and reliable performance for long-term use.
-
左右滑動看表格Test temperature 100℃ Preheat time 15s Test time 15s Preload 300N Test load 100N Upper platen ϕ7.3mm±0.02mm, ϕ10mm±0.02mm, ϕ14mm±0.02mm Dimensions (W×D×H) 37cm ×36cm× 56.5cm (approx.) Power 1∮ AC 220V 50Hz (or specify)
＊Product design and specifications are subject to change without notice. -
-
Details
Standards
- ISO 2007
- BS ISO 2007
- ASTM D3194
- JIS K6300-3
- GB/T 3510
Principle
A cylindrical specimen is placed between the upper and lower platens and compressed to a thickness of 1mm, then held for 15 seconds. After that, a compressive force of 100N±1N is automatically applied for 15 seconds. The final thickness of the specimen is measured at the end of the force application, and the plasticity of the specimen is determined (the final thickness expressed in units equivalent to 0.01mm).
Ergonomic design:
The ergonomic design ensures convenient loading and removal of the specimens for operators.
Intuitive touchscreen:
Featuring a touchscreen interface, the system allows users to easily perform test setup, data recording, and results checking, ensuring intuitive and efficient operation.
Quick test procedure:
The quick test procedure allows users to preset test conditions and run tests in just a few simple steps.
High-precision measurement:
Featuring a high-precision digital indicator for accurate displacement measurement and a stable lever for test load application, the instrument provides reliable measurements and consistent results.
-
Features
Intuitive interface
Features a highly intuitive touchscreen interface for easy setup and operation, ensuring efficient workflow.
Comprehensive rubber testing
Besides measuring the plasticity of rubber, the instrument can be used with an aging oven to determine the Plasticity Retention Index (PRI), evaluating oxidation resistance of raw rubber.
Efficient test procedure
The quick test procedure allows tests to be completed in a few simple steps, significantly improving efficiency and reducing test time.
Stable performance
Equipped with a stable mechanical force loading structure and temperature control system, the instrument ensures consistent and reliable performance for long-term use.
-
Specifications 左右滑動看表格
Test temperature 100℃ Preheat time 15s Test time 15s Preload 300N Test load 100N Upper platen ϕ7.3mm±0.02mm, ϕ10mm±0.02mm, ϕ14mm±0.02mm Dimensions (W×D×H) 37cm ×36cm× 56.5cm (approx.) Power 1∮ AC 220V 50Hz (or specify)
＊Product design and specifications are subject to change without notice. -
Video
