- The GT-7049-A is specifically designed to determine the indentation hardness of flexible cellular materials.
- To assess indentation hardness, the test specimen is compressed between two parallel plates at a specified speed. The indentation hardness is then calculated by dividing the applied load by the area of the specimen.
-
Standards
- ASTM D 1056
- JIS K 6767
- GB/T 10807-2006
- ISO 2439-2008
Principle
Designed for evaluating the indentation hardness of flexible cellular materials, this instrument compresses the test specimen between two parallel plates at a specified speed. The resulting compressive force is detected, transmitted to an indicator for analysis, and displayed on the display of control panel.
Wide applicability:
Well-suited for assessing the load bearing properties of flexible cellular materials used in material research, foam manufacturing, and furniture production.
Materials characteristics assessment:
Provides quantitative data of indentation hardness on cellular materials, helping manufacturers evaluate their properties.
Quality assurance:
Used in manufacturing to ensure that the produced foam materials meet specific quality standards and improve product performance consistency.
Adjustable speed control:
Able to simulate various real-world conditions with adjustable compression speed.
High repeatability:
With a standardized test procedure, this instrument offers high repeatability of test results.
Cost-effective:
By evaluating the properties of cellular materials, the defects rate during production can be minimized, leading to cost savings and better budget management.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Micro-computer control system
Equipped with an advanced micro-computer control system, the GT-7049-A offers high precision control and automatic operation during testing.
Data storage
Capable of recording test data to assist operators in performing further analysis and gaining valuable insights.
Safety feature
Featuring an overload protector and an emergency stop switch, this instrument ensures user safety throughout its operation.
-
左右滑動看表格Capacity 200 kg Load transducer Load cell Indicator U26 Load resolution 1/50,000 Motor AC 1/2 HP inverter duty motor Controller Manual input interface Unit kgf, gf, tonf, lbf, N, kN Load accuracy ±1.0% Compression plate φ200 mm Test speed 5 to 50 mm/min (adjustable) Supporting plate φ6 mm hole, 19 mm hole spacing Dimensions (W×D×H) 75×65×95 cm Weight 130 kg Power 1∮ AC 220V 3A (or specify)
＊Product design and specifications are subject to change without notice.
-
Details
Standards
- ASTM D 1056
- JIS K 6767
- GB/T 10807-2006
- ISO 2439-2008
Principle
Designed for evaluating the indentation hardness of flexible cellular materials, this instrument compresses the test specimen between two parallel plates at a specified speed. The resulting compressive force is detected, transmitted to an indicator for analysis, and displayed on the display of control panel.
Wide applicability:
Well-suited for assessing the load bearing properties of flexible cellular materials used in material research, foam manufacturing, and furniture production.
Materials characteristics assessment:
Provides quantitative data of indentation hardness on cellular materials, helping manufacturers evaluate their properties.
Quality assurance:
Used in manufacturing to ensure that the produced foam materials meet specific quality standards and improve product performance consistency.
Adjustable speed control:
Able to simulate various real-world conditions with adjustable compression speed.
High repeatability:
With a standardized test procedure, this instrument offers high repeatability of test results.
Cost-effective:
By evaluating the properties of cellular materials, the defects rate during production can be minimized, leading to cost savings and better budget management.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Features
Micro-computer control system
Equipped with an advanced micro-computer control system, the GT-7049-A offers high precision control and automatic operation during testing.
Data storage
Capable of recording test data to assist operators in performing further analysis and gaining valuable insights.
Safety feature
Featuring an overload protector and an emergency stop switch, this instrument ensures user safety throughout its operation.
-
Specifications 左右滑動看表格
Capacity 200 kg Load transducer Load cell Indicator U26 Load resolution 1/50,000 Motor AC 1/2 HP inverter duty motor Controller Manual input interface Unit kgf, gf, tonf, lbf, N, kN Load accuracy ±1.0% Compression plate φ200 mm Test speed 5 to 50 mm/min (adjustable) Supporting plate φ6 mm hole, 19 mm hole spacing Dimensions (W×D×H) 75×65×95 cm Weight 130 kg Power 1∮ AC 220V 3A (or specify)
＊Product design and specifications are subject to change without notice.
