- The GT-7037-F is specifically designed to determine the resistance of plastic film to impact.
- A free-falling dart is dropped from a specified height, causing the specimen to fail and replicating the sudden forces encountered in real-world scenarios.
-
Standards
- ASTM D 1709
- GB/T 9639
- CNS 12987
PRINCIPLE
This tester utilizes a pneumatic drive system to release a free-falling dart from a prescribed height and grip the specimen. The energy required to cause the film specimen to fail can be determined when 50% of the specimens fail.
Wide applicability:
Well-suited for a variety of industries such as plastics, material science, food, pharmaceuticals, electronics, construction, automotive, and industrial manufacturing.
Adjustable drop height:
Features an adjustable drop height to replicate different levels of impact.
Standardized test method:
The test specimen is evaluated using a standardized method, ensuring objective comparison across different labs.
Quality control and assurance:
Helps manufacturers to maintain consistency in product quality and performance, supporting them in optimizing production efficiency.
Product improvement:
Provides valuable insights into impact resistance during product development, enabling manufacturers to improve product and material design.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Pneumatic clamp
Utilizes pneumatic force to securely hold the specimen in place, ensuring consistent and stable positioning during testing for accurate results.
Authentic simulation
Replicates sudden impacts on materials during transportation or packaging to assess their real-world performance.
Adjustable drop height
Features adjustable drop height to simulate various real-world scenarios under different impact conditions.
High-efficiency
With its pneumatic drive system, this tester ensures precise specimen clamping and dart dropping, providing efficient testing for large batches of samples.
Product improvement
Provides valuable insights into the material performance to improve product durability.
Cost saving
Supports manufacturers in evaluating the impact resistance of materials during product development, helping to reduce defect rates and avoid costly redesigns.
-
左右滑動看表格Specimen clamp Pneumatic Dart release mechanism Pneumatic Release control Electromagnet Clamp inside diameter 125±2mm Gripping force Not less than 300KPa Mass of dart Method A: 50g
Method B: 300gDiameter of dart head Method A: 38.1±0.13mm
Method B: 50.8±0.13mmRubber gasket Inside diameter: 125±2mm
Outside diameter: 150±3mm
Thickness: 3±1mmDrop height Method A: 0.66±0.01m (26")
Method B: 1.5±0.03m (60")Loading weight Method A: 5g×2, 15g×8, 30g×8, 60g×8 pcs
Method B: 15g×2, 45g×8, 90g×8 pcsCompressed air 3 to 5kgf/cm^2 (prepared by user) Power 1∮ AC220V 1A (or specify)
＊Product design and specifications are subject to change without notice.
-
Details
Standards
- ASTM D 1709
- GB/T 9639
- CNS 12987
PRINCIPLE
This tester utilizes a pneumatic drive system to release a free-falling dart from a prescribed height and grip the specimen. The energy required to cause the film specimen to fail can be determined when 50% of the specimens fail.
Wide applicability:
Well-suited for a variety of industries such as plastics, material science, food, pharmaceuticals, electronics, construction, automotive, and industrial manufacturing.
Adjustable drop height:
Features an adjustable drop height to replicate different levels of impact.
Standardized test method:
The test specimen is evaluated using a standardized method, ensuring objective comparison across different labs.
Quality control and assurance:
Helps manufacturers to maintain consistency in product quality and performance, supporting them in optimizing production efficiency.
Product improvement:
Provides valuable insights into impact resistance during product development, enabling manufacturers to improve product and material design.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Features
Pneumatic clamp
Utilizes pneumatic force to securely hold the specimen in place, ensuring consistent and stable positioning during testing for accurate results.
Authentic simulation
Replicates sudden impacts on materials during transportation or packaging to assess their real-world performance.
Adjustable drop height
Features adjustable drop height to simulate various real-world scenarios under different impact conditions.
High-efficiency
With its pneumatic drive system, this tester ensures precise specimen clamping and dart dropping, providing efficient testing for large batches of samples.
Product improvement
Provides valuable insights into the material performance to improve product durability.
Cost saving
Supports manufacturers in evaluating the impact resistance of materials during product development, helping to reduce defect rates and avoid costly redesigns.
-
Specifications 左右滑動看表格
Specimen clamp Pneumatic Dart release mechanism Pneumatic Release control Electromagnet Clamp inside diameter 125±2mm Gripping force Not less than 300KPa Mass of dart Method A: 50g
Method B: 300gDiameter of dart head Method A: 38.1±0.13mm
Method B: 50.8±0.13mmRubber gasket Inside diameter: 125±2mm
Outside diameter: 150±3mm
Thickness: 3±1mmDrop height Method A: 0.66±0.01m (26")
Method B: 1.5±0.03m (60")Loading weight Method A: 5g×2, 15g×8, 30g×8, 60g×8 pcs
Method B: 15g×2, 45g×8, 90g×8 pcsCompressed air 3 to 5kgf/cm^2 (prepared by user) Power 1∮ AC220V 1A (or specify)
＊Product design and specifications are subject to change without notice.
