- The GT-7011-SWE is specifically designed to assess the water resistance of shoes.
- Shoe samples placed in a water tank with water are flexed at a specific angle. The required number of flexes or the time taken for water penetration during flexing is measured to assess the degree of water resistance.
-
Standards
- GB/T 16641
- ISO 20344-2021 5.15.2
PRINCIPLE
The GT-7012-SWE enables operators to assess the sample's water penetration resistance by subjecting it to specific wet conditions and flexing.
Wide applicability:
Well-suited for whoe shoes with sizes greater than 230.
Authentic simulation:
Simulates flexing in wet conditions, enabling operators to assess the sample's ability to resist water penetration.
Reliable solution:
Specifically designed to assess the performance of shoes to water penetration, ensuring reliable test results.
Water penetration detection:
Equipped with a water penetration signal detector allowing the GT-7012-SWE to automatically stop testing when water penetration occurs.
Adjustable test conditions:
Offers flexible test conditions enabling operators to adjust test speed and angle to fit various testing requirements.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Pneumatic clamps
Utilizes pneumatic-driven clamps to ensure that samples can be secured without variance, improving test consistency and accuracy.
Water penetration detection
Once a water penetration signal is detected, the water penetration testing will be stopped automatically.
Dual-station design
Allows two samples to be tested simultaneously, enhancing work efficiency.
-
左右滑動看表格
＊Product design and specifications are subject to change without notice.Flexing rate 62±2 cpm Specimen fixture 2 (water leak detector included) Flexing angle 0 to 45° (adjustable) Flexing direction Upward Counter LCD display, 0 to 9,999,999 Drain valve Manual drain valve Water leak detector Automatic Dimension (W×D×H) 65 cm × 83 cm × 130 cm Weight (approx.) 204 kg Power 1∮ AC 220V (or specify)
-
Details
Standards
- GB/T 16641
- ISO 20344-2021 5.15.2
PRINCIPLE
The GT-7012-SWE enables operators to assess the sample's water penetration resistance by subjecting it to specific wet conditions and flexing.
Wide applicability:
Well-suited for whoe shoes with sizes greater than 230.
Authentic simulation:
Simulates flexing in wet conditions, enabling operators to assess the sample's ability to resist water penetration.
Reliable solution:
Specifically designed to assess the performance of shoes to water penetration, ensuring reliable test results.
Water penetration detection:
Equipped with a water penetration signal detector allowing the GT-7012-SWE to automatically stop testing when water penetration occurs.
Adjustable test conditions:
Offers flexible test conditions enabling operators to adjust test speed and angle to fit various testing requirements.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Features
Pneumatic clamps
Utilizes pneumatic-driven clamps to ensure that samples can be secured without variance, improving test consistency and accuracy.
Water penetration detection
Once a water penetration signal is detected, the water penetration testing will be stopped automatically.
Dual-station design
Allows two samples to be tested simultaneously, enhancing work efficiency.
-
Specifications 左右滑動看表格
＊Product design and specifications are subject to change without notice.Flexing rate 62±2 cpm Specimen fixture 2 (water leak detector included) Flexing angle 0 to 45° (adjustable) Flexing direction Upward Counter LCD display, 0 to 9,999,999 Drain valve Manual drain valve Water leak detector Automatic Dimension (W×D×H) 65 cm × 83 cm × 130 cm Weight (approx.) 204 kg Power 1∮ AC 220V (or specify)
