- The GT-7012-M8A-AT is designed to assess the abrasion resistance of textile fabrics, shoe uppers, shoe linings, and shoe soles.
- This instrument allows up to 8 specimens to be tested simultaneously. The specimens are abraded against abradants in a Lissajous pattern for a specified number of cycles.
-
Standards
- GB/T 21196.1-2007
PRINCIPLE
The Martindale tester is specifically designed to determine the durability and resistance of textile fabrics, shoe uppers, shoe linings, and shoe soles to abrasion. During a Martindale test, specimens are subjected to repeated abrasion in a Lissajous pattern until a specified number of cycles is reached.
Broad material applicability:
Ideal for fitting materials commonly used in the textile and footwear industries, such as textile fabrics, shoe uppers, shoe linings, and shoe soles.
Multiple test stations:
To enhance work efficiency, the GT-7012-M8A features multiple test stations, allowing up to 8 specimens to be tested simultaneously.
Various rubbing directions:
By rubbing specimens in a Lissajous pattern, the GT-7012-M8A simulates the effects of rubbing in various directions.
Wearing simulation:
Simulates daily wear to ensure the performance and service life of materials in real-world scenarios.
Adjustable rubbing cycles:
Allows operators to set and modify the number of cycles, ensuring test conditions conform to referenced standards.
Abrasion resistance assessment:
Enables operators to assess material performance against abrasion by observing the degree of wear on sample subjected to abrasion testing.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Auto-lifting motion plate
Through our patented design (patent number: M601343), the motion plate can be lifted effortlessly, reducing efforts and increasing work efficiency.
Daily-use simulation
Replicate the results of wearing and tearing through rubbing specimens in a Lissajous pattern.
High efficiency
Up to 8 specimens can be tested simultaneously without interference, increasing work efficiency.
Flexible testing capabilities
This instrument is capable of performing either dry or wet abrasion tests.
Touchscreen interface
The intuitive and user-friendly interface enables operators to effortlessly set parameters and operate tester.
Multi-language display
Supportsing both English and Chinese languages to meet user needs.
-
左右滑動看表格Controller HMI+PLC Load 795 ± 7g (12kPa); 595 ± 7g (9kPa) Test figure 60.5*60.5mm Compression weight 2.5±0.5kg; 120±10mm diameter Specimen holder insert Diameter: 28.65 ± 0.25 mm Distance between ring of holder nut and surface of holder insert: 1.05±0.1mm R: 0.10-0.05 mm Speed 47.5 ± 2.5 cpm Test stations 8 Dimensions 79 cm ×75 cm ×48 cm (W×D×H) Power 1∮ AC 220V 50/60Hz (or specify)
＊Product design and specifications are subject to change without notice.
-
Details
Standards
- GB/T 21196.1-2007
PRINCIPLE
The Martindale tester is specifically designed to determine the durability and resistance of textile fabrics, shoe uppers, shoe linings, and shoe soles to abrasion. During a Martindale test, specimens are subjected to repeated abrasion in a Lissajous pattern until a specified number of cycles is reached.
Broad material applicability:
Ideal for fitting materials commonly used in the textile and footwear industries, such as textile fabrics, shoe uppers, shoe linings, and shoe soles.
Multiple test stations:
To enhance work efficiency, the GT-7012-M8A features multiple test stations, allowing up to 8 specimens to be tested simultaneously.
Various rubbing directions:
By rubbing specimens in a Lissajous pattern, the GT-7012-M8A simulates the effects of rubbing in various directions.
Wearing simulation:
Simulates daily wear to ensure the performance and service life of materials in real-world scenarios.
Adjustable rubbing cycles:
Allows operators to set and modify the number of cycles, ensuring test conditions conform to referenced standards.
Abrasion resistance assessment:
Enables operators to assess material performance against abrasion by observing the degree of wear on sample subjected to abrasion testing.
Standard conformity:
Ensures that products meet industry standards and satisfy quality expectations in the market.
-
Features
Auto-lifting motion plate
Through our patented design (patent number: M601343), the motion plate can be lifted effortlessly, reducing efforts and increasing work efficiency.
Daily-use simulation
Replicate the results of wearing and tearing through rubbing specimens in a Lissajous pattern.
High efficiency
Up to 8 specimens can be tested simultaneously without interference, increasing work efficiency.
Flexible testing capabilities
This instrument is capable of performing either dry or wet abrasion tests.
Touchscreen interface
The intuitive and user-friendly interface enables operators to effortlessly set parameters and operate tester.
Multi-language display
Supportsing both English and Chinese languages to meet user needs.
-
Specifications 左右滑動看表格
Controller HMI+PLC Load 795 ± 7g (12kPa); 595 ± 7g (9kPa) Test figure 60.5*60.5mm Compression weight 2.5±0.5kg; 120±10mm diameter Specimen holder insert Diameter: 28.65 ± 0.25 mm Distance between ring of holder nut and surface of holder insert: 1.05±0.1mm R: 0.10-0.05 mm Speed 47.5 ± 2.5 cpm Test stations 8 Dimensions 79 cm ×75 cm ×48 cm (W×D×H) Power 1∮ AC 220V 50/60Hz (or specify)
＊Product design and specifications are subject to change without notice.
